更改主音量电平 [英] Changing master volume level
本文介绍了更改主音量电平的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！
问题描述
我怎样才能更改主音量？使用这种code
How can I change the master volume level? Using this code
[DllImport ("winmm.dll")]
public static extern int waveOutSetVolume (IntPtr hwo, uint dwVolume);
waveOutSetVolume (IntPtr.Zero, (((uint)uint.MaxValue & 0x0000ffff) | ((uint)uint.MaxValue << 16)));
我可以设置波浪卷，但如果主音量太低，这不会有任何影响。
I can set the wave volume but if the master volume is too low this won't have any effect.
感谢您的帮助。
推荐答案
好吧，这里有云：
const int MAXPNAMELEN = 32;
const int MIXER_SHORT_NAME_CHARS = 16;
const int MIXER_LONG_NAME_CHARS = 64;
[Flags] enum MIXERLINE_LINEF : uint{
ACTIVE = 0x00000001,
DISCONNECTED = 0x00008000,
SOURCE = 0x80000000
}
[Flags] enum MIXER : uint{
GETLINEINFOF_DESTINATION = 0x00000000,
GETLINEINFOF_SOURCE = 0x00000001,
GETLINEINFOF_LINEID = 0x00000002,
GETLINEINFOF_COMPONENTTYPE = 0x00000003,
GETLINEINFOF_TARGETTYPE = 0x00000004,
GETLINEINFOF_QUERYMASK = 0x0000000F,
GETLINECONTROLSF_ALL = 0x00000000,
GETLINECONTROLSF_ONEBYID = 0x00000001,
GETLINECONTROLSF_ONEBYTYPE = 0x00000002,
GETLINECONTROLSF_QUERYMASK = 0x0000000F,
GETCONTROLDETAILSF_VALUE = 0x00000000,
GETCONTROLDETAILSF_LISTTEXT = 0x00000001,
GETCONTROLDETAILSF_QUERYMASK = 0x0000000F,
OBJECTF_MIXER = 0x00000000,
OBJECTF_WAVEOUT = 0x10000000,
OBJECTF_WAVEIN = 0x20000000,
OBJECTF_MIDIOUT = 0x30000000,
OBJECTF_MIDIIN = 0x40000000,
OBJECTF_AUX = 0x50000000,
OBJECTF_HANDLE = 0x80000000,
OBJECTF_HMIXER = OBJECTF_HANDLE | OBJECTF_MIXER,
OBJECTF_HWAVEOUT = OBJECTF_HANDLE | OBJECTF_WAVEOUT,
OBJECTF_HWAVEIN = OBJECTF_HANDLE | OBJECTF_WAVEIN,
OBJECTF_HMIDIOUT = OBJECTF_HANDLE | OBJECTF_MIDIOUT,
OBJECTF_HMIDIIN = OBJECTF_HANDLE | OBJECTF_MIDIIN
}
[Flags] enum MIXERCONTROL_CT : uint{
CLASS_MASK = 0xF0000000,
CLASS_CUSTOM = 0x00000000,
CLASS_METER = 0x10000000,
CLASS_SWITCH = 0x20000000,
CLASS_NUMBER = 0x30000000,
CLASS_SLIDER = 0x40000000,
CLASS_FADER = 0x50000000,
CLASS_TIME = 0x60000000,
CLASS_LIST = 0x70000000,
SUBCLASS_MASK = 0x0F000000,
SC_SWITCH_BOOLEAN = 0x00000000,
SC_SWITCH_BUTTON = 0x01000000,
SC_METER_POLLED = 0x00000000,
SC_TIME_MICROSECS = 0x00000000,
SC_TIME_MILLISECS = 0x01000000,
SC_LIST_SINGLE = 0x00000000,
SC_LIST_MULTIPLE = 0x01000000,
UNITS_MASK = 0x00FF0000,
UNITS_CUSTOM = 0x00000000,
UNITS_BOOLEAN = 0x00010000,
UNITS_SIGNED = 0x00020000,
UNITS_UNSIGNED = 0x00030000,
UNITS_DECIBELS = 0x00040000, /* in 10ths */
UNITS_PERCENT = 0x00050000, /* in 10ths */
}
[Flags] enum MIXERCONTROL_CONTROLTYPE : uint{
CUSTOM = MIXERCONTROL_CT.CLASS_CUSTOM | MIXERCONTROL_CT.UNITS_CUSTOM,
BOOLEANMETER = MIXERCONTROL_CT.CLASS_METER | MIXERCONTROL_CT.SC_METER_POLLED | MIXERCONTROL_CT.UNITS_BOOLEAN,
SIGNEDMETER = MIXERCONTROL_CT.CLASS_METER | MIXERCONTROL_CT.SC_METER_POLLED | MIXERCONTROL_CT.UNITS_SIGNED,
PEAKMETER = SIGNEDMETER + 1,
UNSIGNEDMETER = MIXERCONTROL_CT.CLASS_METER | MIXERCONTROL_CT.SC_METER_POLLED | MIXERCONTROL_CT.UNITS_UNSIGNED,
BOOLEAN = MIXERCONTROL_CT.CLASS_SWITCH | MIXERCONTROL_CT.SC_SWITCH_BOOLEAN | MIXERCONTROL_CT.UNITS_BOOLEAN,
ONOFF = BOOLEAN + 1,
MUTE = BOOLEAN + 2,
MONO = BOOLEAN + 3,
LOUDNESS = BOOLEAN + 4,
STEREOENH = BOOLEAN + 5,
BASS_BOOST = BOOLEAN + 0x00002277,
BUTTON = MIXERCONTROL_CT.CLASS_SWITCH | MIXERCONTROL_CT.SC_SWITCH_BUTTON | MIXERCONTROL_CT.UNITS_BOOLEAN,
DECIBELS = MIXERCONTROL_CT.CLASS_NUMBER | MIXERCONTROL_CT.UNITS_DECIBELS,
SIGNED = MIXERCONTROL_CT.CLASS_NUMBER | MIXERCONTROL_CT.UNITS_SIGNED,
UNSIGNED = MIXERCONTROL_CT.CLASS_NUMBER | MIXERCONTROL_CT.UNITS_UNSIGNED,
PERCENT = MIXERCONTROL_CT.CLASS_NUMBER | MIXERCONTROL_CT.UNITS_PERCENT,
SLIDER = MIXERCONTROL_CT.CLASS_SLIDER | MIXERCONTROL_CT.UNITS_SIGNED,
PAN = SLIDER + 1,
QSOUNDPAN = SLIDER + 2,
FADER = MIXERCONTROL_CT.CLASS_FADER | MIXERCONTROL_CT.UNITS_UNSIGNED,
VOLUME = FADER + 1,
BASS = FADER + 2,
TREBLE = FADER + 3,
EQUALIZER = FADER + 4,
SINGLESELECT = MIXERCONTROL_CT.CLASS_LIST | MIXERCONTROL_CT.SC_LIST_SINGLE | MIXERCONTROL_CT.UNITS_BOOLEAN,
MUX = SINGLESELECT + 1,
MULTIPLESELECT = MIXERCONTROL_CT.CLASS_LIST | MIXERCONTROL_CT.SC_LIST_MULTIPLE | MIXERCONTROL_CT.UNITS_BOOLEAN,
MIXER = MULTIPLESELECT + 1,
MICROTIME = MIXERCONTROL_CT.CLASS_TIME | MIXERCONTROL_CT.SC_TIME_MICROSECS | MIXERCONTROL_CT.UNITS_UNSIGNED,
MILLITIME = MIXERCONTROL_CT.CLASS_TIME | MIXERCONTROL_CT.SC_TIME_MILLISECS | MIXERCONTROL_CT.UNITS_UNSIGNED
}
[StructLayout(LayoutKind.Sequential, CharSet=CharSet.Auto)]
struct MIXERLINE{
[StructLayout(LayoutKind.Sequential, CharSet=CharSet.Auto)]
public struct TargetInfo{
public uint dwType;
public uint dwDeviceID;
public ushort wMid;
public ushort wPid;
public uint vDriverVersion;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst=MAXPNAMELEN)]
public string szPname;
}
public uint cbStruct;
public uint dwDestination;
public uint dwSource;
public uint dwLineID;
public MIXERLINE_LINEF fdwLine;
public uint dwUser;
public uint dwComponentType;
public uint cChannels;
public uint cConnection;
public uint cControls;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst=MIXER_SHORT_NAME_CHARS)]
public string szShortName;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst=MIXER_LONG_NAME_CHARS)]
public string szName;
public TargetInfo Target;
}
[StructLayout(LayoutKind.Sequential, CharSet=CharSet.Auto)]
struct MIXERCONTROL{
[StructLayout(LayoutKind.Explicit)]
public struct BoundsInfo{
[FieldOffset(0)]
public int lMinimum;
[FieldOffset(4)]
public int lMaximum;
[FieldOffset(0)]
public uint dwMinimum;
[FieldOffset(4)]
public uint dwMaximum;
[FieldOffset(8), MarshalAs(UnmanagedType.ByValArray, SizeConst=4)]
public uint[] dwReserved;
}
[StructLayout(LayoutKind.Explicit)]
public struct MetricsInfo{
[FieldOffset(0)]
public uint cSteps;
[FieldOffset(0)]
public uint cbCustomData;
[FieldOffset(4), MarshalAs(UnmanagedType.ByValArray, SizeConst=5)]
public uint[] dwReserved;
}
public uint cbStruct;
public uint dwControlID;
public MIXERCONTROL_CONTROLTYPE dwControlType;
public uint fdwControl;
public uint cMultipleItems;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst=MIXER_SHORT_NAME_CHARS)]
public string szShortName;
[MarshalAs(UnmanagedType.ByValTStr, SizeConst=MIXER_LONG_NAME_CHARS)]
public string szName;
public BoundsInfo Bounds;
public MetricsInfo Metrics;
}
[StructLayout(LayoutKind.Explicit)]
struct MIXERLINECONTROLS{
[FieldOffset(0)]
public uint cbStruct;
[FieldOffset(4)]
public uint dwLineID;
[FieldOffset(8)]
public uint dwControlID;
[FieldOffset(8)] // not a typo! overlaps previous field
public uint dwControlType;
[FieldOffset(12)]
public uint cControls;
[FieldOffset(16)]
public uint cbmxctrl;
[FieldOffset(20)]
public IntPtr pamxctrl;
}
[StructLayout(LayoutKind.Explicit)]
struct MIXERCONTROLDETAILS{
[FieldOffset(0)]
public uint cbStruct;
[FieldOffset(4)]
public uint dwControlID;
[FieldOffset(8)]
public uint cChannels;
[FieldOffset(12)]
public IntPtr hwndOwner;
[FieldOffset(12)] // not a typo!
public uint cMultipleItems;
[FieldOffset(16)]
public uint cbDetails;
[FieldOffset(20)]
public IntPtr paDetails;
}
[StructLayout(LayoutKind.Sequential)]
struct VOLUME{
public int left;
public int right;
}
struct MixerInfo{
public uint volumeCtl;
public uint muteCtl;
public int minVolume;
public int maxVolume;
}
[DllImport("WinMM.dll", CharSet=CharSet.Auto)]
static extern uint mixerGetLineInfo (IntPtr hmxobj, ref MIXERLINE pmxl, MIXER flags);
[DllImport("WinMM.dll", CharSet=CharSet.Auto)]
static extern uint mixerGetLineControls (IntPtr hmxobj, ref MIXERLINECONTROLS pmxlc, MIXER flags);
[DllImport("WinMM.dll", CharSet=CharSet.Auto)]
static extern uint mixerGetControlDetails(IntPtr hmxobj, ref MIXERCONTROLDETAILS pmxcd, MIXER flags);
[DllImport("WinMM.dll", CharSet=CharSet.Auto)]
static extern uint mixerSetControlDetails(IntPtr hmxobj, ref MIXERCONTROLDETAILS pmxcd, MIXER flags);
static MixerInfo GetMixerControls(){
MIXERLINE mxl = new MIXERLINE();
MIXERLINECONTROLS mlc = new MIXERLINECONTROLS();
mxl.cbStruct = (uint)Marshal.SizeOf(typeof(MIXERLINE));
mlc.cbStruct = (uint)Marshal.SizeOf(typeof(MIXERLINECONTROLS));
mixerGetLineInfo(IntPtr.Zero, ref mxl, MIXER.OBJECTF_MIXER | MIXER.GETLINEINFOF_DESTINATION);
mlc.dwLineID = mxl.dwLineID;
mlc.cControls = mxl.cControls;
mlc.cbmxctrl = (uint)Marshal.SizeOf(typeof(MIXERCONTROL));
mlc.pamxctrl = Marshal.AllocHGlobal((int)(mlc.cbmxctrl * mlc.cControls));
mixerGetLineControls(IntPtr.Zero, ref mlc, MIXER.OBJECTF_MIXER | MIXER.GETLINECONTROLSF_ALL);
MixerInfo rtn = new MixerInfo();
for(int i = 0; i < mlc.cControls; i++){
MIXERCONTROL mxc = (MIXERCONTROL)Marshal.PtrToStructure((IntPtr)((int)mlc.pamxctrl + (int)mlc.cbmxctrl * i), typeof(MIXERCONTROL));
switch(mxc.dwControlType){
case MIXERCONTROL_CONTROLTYPE.VOLUME:
rtn.volumeCtl = mxc.dwControlID;
rtn.minVolume = mxc.Bounds.lMinimum;
rtn.maxVolume = mxc.Bounds.lMaximum;
break;
case MIXERCONTROL_CONTROLTYPE.MUTE:
rtn.muteCtl = mxc.dwControlID;
break;
}
}
Marshal.FreeHGlobal(mlc.pamxctrl);
return rtn;
}
static VOLUME GetVolume(MixerInfo mi){
MIXERCONTROLDETAILS mcd = new MIXERCONTROLDETAILS();
mcd.cbStruct = (uint)Marshal.SizeOf(typeof(MIXERCONTROLDETAILS));
mcd.dwControlID = mi.volumeCtl;
mcd.cMultipleItems = 0;
mcd.cChannels = 2;
mcd.cbDetails = (uint)Marshal.SizeOf(typeof(int));
mcd.paDetails = Marshal.AllocHGlobal((int)mcd.cbDetails);
mixerGetControlDetails(IntPtr.Zero, ref mcd, MIXER.GETCONTROLDETAILSF_VALUE | MIXER.OBJECTF_MIXER);
VOLUME rtn = (VOLUME)Marshal.PtrToStructure(mcd.paDetails, typeof(VOLUME));
Marshal.FreeHGlobal(mcd.paDetails);
return rtn;
}
static bool IsMuted(MixerInfo mi){
MIXERCONTROLDETAILS mcd = new MIXERCONTROLDETAILS();
mcd.cbStruct = (uint)Marshal.SizeOf(typeof(MIXERCONTROLDETAILS));
mcd.dwControlID = mi.muteCtl;
mcd.cMultipleItems = 0;
mcd.cChannels = 1;
mcd.cbDetails = 4;
mcd.paDetails = Marshal.AllocHGlobal((int)mcd.cbDetails);
mixerGetControlDetails(IntPtr.Zero, ref mcd, MIXER.GETCONTROLDETAILSF_VALUE | MIXER.OBJECTF_MIXER);
int rtn = Marshal.ReadInt32(mcd.paDetails);
Marshal.FreeHGlobal(mcd.paDetails);
return rtn != 0;
}
static void AdjustVolume(MixerInfo mi, int delta){
VOLUME volume = GetVolume(mi);
if(delta > 0){
volume.left = Math.Min(mi.maxVolume, volume.left + delta);
volume.right = Math.Min(mi.maxVolume, volume.right + delta);
}else{
volume.left = Math.Max(mi.minVolume, volume.left + delta);
volume.right = Math.Max(mi.minVolume, volume.right + delta);
}
SetVolume(mi, volume);
}
static void SetVolume(MixerInfo mi, VOLUME volume){
MIXERCONTROLDETAILS mcd = new MIXERCONTROLDETAILS();
mcd.cbStruct = (uint)Marshal.SizeOf(typeof(MIXERCONTROLDETAILS));
mcd.dwControlID = mi.volumeCtl;
mcd.cMultipleItems = 0;
mcd.cChannels = 2;
mcd.cbDetails = (uint)Marshal.SizeOf(typeof(int));
mcd.paDetails = Marshal.AllocHGlobal((int)mcd.cbDetails);
Marshal.StructureToPtr(volume, mcd.paDetails, false);
mixerSetControlDetails(IntPtr.Zero, ref mcd, MIXER.GETCONTROLDETAILSF_VALUE | MIXER.OBJECTF_MIXER);
Marshal.FreeHGlobal(mcd.paDetails);
}
static void SetMute(MixerInfo mi, bool mute){
MIXERCONTROLDETAILS mcd = new MIXERCONTROLDETAILS();
mcd.cbStruct = (uint)Marshal.SizeOf(typeof(MIXERCONTROLDETAILS));
mcd.dwControlID = mi.muteCtl;
mcd.cMultipleItems = 0;
mcd.cChannels = 1;
mcd.cbDetails = 4;
mcd.paDetails = Marshal.AllocHGlobal((int)mcd.cbDetails);
Marshal.WriteInt32(mcd.paDetails, mute ? 1 : 0);
mixerSetControlDetails(IntPtr.Zero, ref mcd, MIXER.GETCONTROLDETAILSF_VALUE | MIXER.OBJECTF_MIXER);
Marshal.FreeHGlobal(mcd.paDetails);
}
这code是巨大的和丑陋的。这是一些C ++ code的翻译，并与具有定义所有的P / Invoke的东西，这是一个很多code。但是我测试过它，和它的作品。要使用它，你只需要像：
This code is huge and ugly. It's a translation of some C++ code, and with having to define all the P/Invoke stuff, it's a lot more code. But I've tested it, and it works. To use it, you simply need something like:
MixerInfo mi = GetMixerControls();
AdjustVolume(mi, 100); // add 100 to the current volume
或
MixerInfo mi = GetMixerControls();
AdjustVolume(mi, (mi.maxVolume - mi.minVolume) / 10); // increase the volume by 10% of total range
或
MixerInfo mi = GetMixerControls();
SetVolume(mi, mi.maxVolume); // let's get this party crunk'd!
或
MixerInfo mi = GetMixerControls();
SetMute(mi, true); // shhhh!!!!!!
警告
由于使用固定大小的整数和现场偏移，这可能会在飞驰64位Windows失败。我不知道，我没有测试过，并没有引起足够的重视知道是否这些字段大小扩展到64位。的警告codor 的
Due to the use of fixed-sized ints and field offsets, this may fail fantastically on 64-bit Windows. I don't know, I haven't tested it and haven't paid enough attention to know if these field sizes expand to 64 bits. caveat codor
修改
为了简单（相对而言）的缘故，我已经离开了任何错误处理。你真的应该检查返回$ C的所有功能mixerXXX $ CS，但我会离开，作为一个练习留给读者（如阅读：我是懒得这样做）。
For the sake of simplicity (relatively speaking), I've left out any error handling. You should really check the return codes of all the mixerXXX functions, but I'll leave that as an exercise for the reader (read as: I was too lazy to do this).
这篇关于更改主音量电平的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！
查看全文
