与WHH 6.5相比,WEC7的RAMDISK性能较慢 [英] RAMDISK performance is slow in WEC7 compared to WHH 6.5

查看:98
本文介绍了与WHH 6.5相比,WEC7的RAMDISK性能较慢的处理方法,对大家解决问题具有一定的参考价值,需要的朋友们下面随着小编来一起学习吧!

问题描述

大家好,

我在WEC7上测试了RAMDISK。与WinCE 5.0相比,它的性能非常慢。

I was testing RAMDISK on WEC7. It's performance is very slow when compared to WinCE 5.0.

我已按照以下链接进行配置。 

I have followed the below link to configure it. 

http://nicolasbesson.blogspot.in/2010/04/enable-ramdisk-and-mass -storage-under.html

硬件配置 -

处理器 - TI OMAP4470

Processor - TI OMAP4470

RAM - SDRAM 512 MB

RAM - SDRAM 512 MB

RAMDISK大小为32MB。

RAMDISK size is 32MB.

我的注册表设置如下:

My registry settings are as follows:

[HKEY_LOCAL_MACHINE\System\StorageManager \Profiles\RAMDisk]

    "AutoMount"= dword:1

    "AutoPart"= dword:1

    "自动套用格式"= dword:1

    "名称"="RAM磁盘块设备"

    " Folder" =" RAM Drive"




[HKEY_LOCAL_MACHINE \System\StorageManager \ AutoLoad \ RAMDisk]

    "DriverPath"=" Drivers \\BuiltIn\\RAMDisk"

    " LoadFlags" = dword:1

    "BootPhase"= dword:2



[HKEY_LOCAL_MACHINE \Drivers\BuiltIn\DDDisk]

    "Dll"=" ramdisk.dll"

    " Prefix" =" DSK"

    " FriendlyName" =" RAM Disk Driver"
    "订单"= dword:4

    " IClass" = multi_sz:$(CE_DRIVER_BLOCK_GUID)

    " Profile" =" RAMDisk"

    " Index" = dword:6

    "大小"= dword:2000000      ;默认大小32MB

;

[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\RAMDisk]
    "AutoMount"=dword:1
    "AutoPart"=dword:1
    "AutoFormat"=dword:1
    "Name"="RAM Disk Block Device"
    "Folder"="RAM Drive"


[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\RAMDisk]
    "DriverPath"="Drivers\\BuiltIn\\RAMDisk"
    "LoadFlags"=dword:1
    "BootPhase"=dword:2

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RAMDisk]
    "Dll"="ramdisk.dll"
    "Prefix"="DSK"
    "FriendlyName"="RAM Disk Driver"
    "Order"=dword:4
    "IClass"=multi_sz:$(CE_DRIVER_BLOCK_GUID)
    "Profile"="RAMDisk"
    "Index"=dword:6
    "Size"=dword:2000000       ; Default size 32MB
;

当我将4MB文件复制到RAM DRIVE时需要大约1035ms(大约1秒)的时间,因为在wince 5.0上它只需要270ms。为什么它很慢?我错过了什么吗?我应该为Windows Embedded compact 7做一些特殊配置吗?两个平台的源
文件是相同的。

When i copy a 4MB file to the RAM DRIVE it takes time around 1035ms(around 1sec) where as on wince 5.0 it takes just 270ms. Why is that it is slow? Am i missing something? should i do some special configuration for Windows Embedded compact 7? the source files are the same for both platforms.

问候,

James

 

推荐答案

在Windows嵌入式紧凑型7中为RAMDISK做的任何额外配置?有人请回复..

问候,

James


这篇关于与WHH 6.5相比,WEC7的RAMDISK性能较慢的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持IT屋!

查看全文
登录 关闭
扫码关注1秒登录
发送“验证码”获取 | 15天全站免登陆