无休止的测试 - CHAOS和Sleep&使用IO之前和之后的PNP（禁用和启用） [英] Neverending Test-- CHAOS And Sleep & PNP (disable and enable) with IO Before and After

问题描述

我在运行并发硬件和操作系统（CHAOS）测试时遇到问题，并且"睡眠和PNP（禁用和启用）使用IO之前和之后"在PCIe SATA SSD下测试存储驱动程序。 Microsoft AHCI驱动程序+ Windows 8 - 32位
OS + PCIe SSD在华硕p8h67H上。



观察：



1.执行"并发硬件和操作系统（CHAOS）测试"超过6小时。测试未完成。因此我手动重新启动系统以终止/取消CHAOS执行。

i'm facing issues while running Concurrent Hardware And Operating System (CHAOS) Test and "Sleep and PNP (disable and enable) with IO Before and After" test for storage driver under PCIe SATA SSD. Microsoft AHCI driver + Windows 8 - 32 Bit OS + PCIe SSD on ASUS p8h67H.

Observations:

1. On execution of "Concurrent Hardware And Operating System (CHAOS) Test" for morethan 6 hours. test not completed. hence i restarted the system manually to terminate/cancel the CHAOS execution.

成功重启后，CHAOS测试按预期失败（手动重启），然后是"睡眠和PNP（禁用并启用）IO前后"测试是按预期执行但由于"Device_Status_Check"
失败并且错误说"WDTF_TEST：发现设备具有非零问题代码或是幻像"而立即失败。记录设备信息。"。



2.在设备管理器中，MS AHCI驱动程序显示为黄色波段并说"此设备无法启动（代码10）。发生了I / O适配器硬件错误"。 



重新启动并重新连接PCIe后，SATA SSD会导致同样的问题。要使其工作，需要在没有PCIe SSD的情况下启动系统，然后再次通过连接PCIe SATA SSD重新启动系统。观察到Microsoft AHCI
驱动程序上没有黄色波段，我尝试执行"睡眠和PNP（禁用和启用）IO前后"测试。此测试执行也永远不会像并发硬件和操作系统（CHAOS）测试那样结束。

After successful reboot, CHAOS test is failed as expected (as manual restart) and followed by "Sleep and PNP (disable and enable) with IO Before and After" test is get executed as expected but failed immediately because of failure in "Device_Status_Check" and error saying "WDTF_TEST : Found a device that has a non-zero problem code or is phantom. Logging device info.".

2. In Device manager, MS AHCI driver is displayed in yellow band and saying "This device cannot start (Code 10). An I/O adaptor hardware error has occurred". 

After re-start and also reconnection of PCIe SATA SSD leads to same problem. To make it work, need to boot the system without PCIe SSD and later on again rebooted the system with connection of PCIe SATA SSD. Observed there is no yellow band on Microsoft AHCI driver and I tried to executed "Sleep and PNP (disable and enable) with IO Before and After" test. this test execution also never ending like Concurrent Hardware And Operating System (CHAOS) Test.

为什么微软AHCI驱动程序本身没有完成两个测试用例的执行每个执行5个小时？ 

why on microsoft AHCI driver itself not completing execution of both test cases within 5 hours of execution each? 

请帮帮我...先谢谢你...

Please help me out... Thanks in Advance...

推荐答案

这是前一个问题的答案，我希望可以帮到你

This was an answer for previous question, I wish can help you

客户端计算机在测试期间进入休眠状态

Client computer goes to sleep during a test

一台机器是在执行测试时，AOAC（始终开启，始终连接）计算机但不是ARM计算机可能会进入休眠状态。
要防止这种情况，请从每台客户端计算机上的提升命令行运行以下命令：

copy

powercfg / setacvalueindex scheme_current sub_video videoidle 0& ; Powercfg / setdcvalueindex scheme_current sub_video videoidle
0& Powercfg / s scheme_current

这篇关于无休止的测试 - CHAOS和Sleep&使用IO之前和之后的PNP（禁用和启用）的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！