Expression Blend 2 SP1安装失败 [英] Expression Blend 2 SP1 Install Failure

问题描述

我下载并安装了BlendV2SP1_en.exe。它安装成功。重启后，打开Expression Blend2后，收到以下消息。 "预览已过期。安装更新版本。唯一的选择是点击'oK'。完成后，Expresssion Blend关闭。请注意，在标题栏中它表示"Expression Blend Preview"。

原始安装来自DVD并已成功安装。没有任何迹象表明"预览"



WinXP SP3（最新版）
Expression Web 2
Visual Studio 2008 Standard SP1
Visual Web Developer 2008 SP1（Express）
Visual Basic 2008 SP1（Express）
Silverlight v2.0.31005.0
.Net Framwork 3.5 SP1

然后我使用"添加/删除程序"卸载了Expression Blend2 SP1。它是成功的，Expression Blend现在正常打开。

我很好奇是否有人看过这个问题，如果你做了，你做了什么修复它？

我真的很喜欢安装Service Pack以便我可以利用Silverlight2。

感谢任何帮助或见解，

-Preston

ps：我在连接，到目前为止还没有评论。

-P

---

哥伦比亚，CA。美国
http://www.gildedmoon.com

I downloaded and Installed BlendV2SP1_en.exe. It installed succesfully. After a reboot, and upon opening Expression Blend2, I received the following message. "The Preview has Expired. Install an Updated version. The only option was to click 'oK". After doing so, Expresssion Blend closed. Note that in the title bar it said "Expression Blend Preview".

The original installation was from DVD and installed successfully. There was no indication of "Preview"

WinXP SP3 (Up to date)
Expression Web 2
Visual Studio 2008 Standard SP1
Visual Web Developer 2008 SP1 (Express)
Visual Basic 2008 SP1 (Express)
Silverlight v2.0.31005.0
.Net Framwork 3.5 SP1

I then uninstalled Expression Blend2 SP1 using Add/Remove Programs. It was successful, and Expression Blend now opens normally.

I am curious if anyone has seen this issue, and if you did, what did you do to fix it?

I would really like to install the service pack so that I can take advantage of Silverlight2.

Thanks for any help or insight,

-Preston

ps: I did bug this at Connect, and so far there have been no comments.

-P

---

Columbia, CA. USA http://www.gildedmoon.com

推荐答案

我有完全相同的问题但是，我的情况有一些细微差别如下所示：

1.） Expression Studio 2 - 升级版本
2.） Windows Vista Ultimate SP1
< br>
我认为普雷斯顿B实际上意味着通知对话框提示逐字说明："预先发布的版本此产品已过期。您必须更新到较新的版本。";应用程序的标题栏确实状态："Microsoft Expression Blend 2 Service Pack 1 Preview"。


收到我的错误报告后，汇总Blend 2崩溃了，我选择让Vista尝试调查问题并找到任何可能的解决方案。一个对话框提示通知我，微软已经发布了一个较新版本的Blend，我应该得到那个版本，因为它纠正了许多错误，主要是那个据称当时崩溃我的应用程序的错误。

我查了一下Blend 2下载页面和该版本2.0.1523.0与我当天早些时候从DVD安装的版本相同。考虑到这一点，我继续只下载Service Pack并成功完成安装过程，只是遇到了"预发布版本已过期"。尝试重新打开Blend 2时的对话框。由于应用程序被模态对话框锁定，我甚至无法输入产品激活的序列号。

旁边安装的其他工具Blend 2仍然被激活。当我打开所有其他寻找类似指示的人时，他们完全可以操作，就像我现在所知道的那样。

什么是"预发行版"？事情呢？现在，这给我一些交叉的信号。这个问题显然不是特定于平台的，呃！奇怪的是，与Preston B进入XP软件管理器的方法相比，我的Vista的软件管理器只能识别Expression Media 2的SP1，因此，我将尝试以下概述的以下措施。希望人们可以在这里找到他们的解决方案，无论平台是否具有合并参考。



将执行以下措施：


1.）我将使用媒体DVD在Blend 2上执行安装修复功能。


2.）如果第1步失败，那么...
< br> a。 - 卸载Blend 2 SP1




结果：

1。）基于DVD媒体：Blend 2"Repair Installation""事务失败。
2.）在上一次安装SP1的情况下，Expression Blend 2的新安装失败。
2.） updates manager * 卸载SP1成功。



注意：

在查看SP1附带的随附许可协议后，声明服务包是预览本身。这让我认为在Blend 2的模态对话框通知提示中提到预览语句，如上所述，标题栏实际上是引用服务包的状态作为预览，并不表示Blend 2的回归：退回到预览试用版。



*更新管理器：

通过执行以下操作打开"控制面板"管理组窗口：

转到并打开"开始菜单">转到并点击/将鼠标悬停在"所有程序">上转到并打开文件夹'附件'>向下滚动并打开文件夹'Sytem Tools'>向下滚动并单击"控制面板"菜单选项链接。

从"控制面板"中进行选择。窗口执行以下操作：

向下滚动到主窗口客户端区域中的"程序"选项组，然后单击"卸载程序"链接。

查看现在打开的"程序"和功能"对话框查看窗口的左上角，注意到在标题"任务"下分组的其他链接的集合。导航到并单击"查看已安装的更新"组中的第一个链接。请耐心等待，并填写已安装更新的列表;这可能需要一些时间，具体取决于您在整个系统中安装的更新数量，包括软件更新。列表完成后，向下滚动，直到找到Expression Blend 2 SP1安装条目;单击它一次以选择它并导航回到列表上方的灰色工具栏，然后单击"卸载"选项链接。

正常执行卸载并在完成此过程后等待安装的更新列表重新填充并确保不存在SP1更新。从控制面板一直退出并启动Expression Blend 2的副本，您会发现Blend将正常启动，就像在Windows XP上为Preston B一样。




结论：

Expression Blend 2的Service Pack 1是一个公开预览版本，而不是我已经确定的主流版本候选版本。此时，Service Pack导致与Blend 2的锁定这一事实规定社区无法有效地评估当前的包。 Blend 2用户，比如我和Preston B，将不得不等待更容易访问，更新的Blend 2 SP1预览，或者只是等到更新包的最终版本。

I have the exact same problem but, a few minor differences in my case as indicated below:

    1.) Expression Studio 2 - Upgrade Version
    2.) Windows Vista Ultimate SP1


I believe that Preston B actually meant that the notification dialog prompt stated verbatim: "The prereleased version of this product has expired. You must update to a newer release."; the application's title bar does state: "Microsoft Expression Blend 2 Service Pack 1 Preview".



  Upon receiving my error report, summating that Blend 2 was crashing, I opted to let Vista try an investigation into the problem and find any possible solutions. A dialog prompt notified me that Microsoft has published a newer version of Blend and that I should get that one as it corrects numerous bugs, primarily the one that had allegedly crashed my application in question at that time.

  I checked the Blend 2 download page and that version, 2.0.1523.0, is identical to the one I had installed from DVD earlier that day. With this in mind I proceeded to download only the service pack and went through the installation procedure successfully only to run into the "the prerelease version has expired" dialog when I attempted to reopen Blend 2. I could not even enter in the serial number for product activation due to the fact that the application was locked out by the modal dialog.

  The other tools that were installed along side of Blend 2 are still activated. They're fully operational, as best as I can tell at the moment, as I went through opening all the others looking for a similar indication.

  What's up with the "prerelease version" thing anyway? Now that's throwing me some crossed signals. This issue is obviously not platform specific, duh! Strangely, in contrast to Preston B's methodology of going to XP's software manager my Vista's software manager only recognizes SP1 for Expression Media 2 therefore, I am going to try the following measures outlined below. Hopefully people will find their solution here regardless of platform with a consolidated reference.



The following measures are going to be executed:


    1.) I am going to use the media DVD to perform an installation repair function on Blend 2.


    2.) If step 1 fails, then...

         a. - uninstall Blend 2 SP1




Results:

    1.) The DVD media based: Blend 2 "Repair Installation" transaction failed.
    2.) New install of Expression Blend 2 over top of the previous install with SP1 failed.
    2.) The updates manager* uninstallation of the SP1 succeeded.



Note:

    Upon review of the accompanying license agreement that came packaged with SP1 it is stated that the Service Package is a preview itself. This leads me to think that the mention of the Preview statement in Blend 2's modal dialog notification prompt, as mentioned above, and Title-bar are actually referencing the state of the service package as a preview and is not indicative to the regression of Blend 2: stepping back into a preview trial.



* Updates Manager: 

Open the Control Panel management group window by performing the following actions:

Goto and open the 'Start Menu' > Goto and click/hover over 'All Programs' > Goto and open the folder 'Accessories' > Scroll down to and open the folder 'Sytem Tools' > Scroll down to and click the 'Control Panel' menu option link.

From within the "Control Panel" window do the following:

Scroll down to the 'Programs' options group in the main window client area, then click the 'Uninstall a program' link.

Viewing the now open "Programs and Features" dialog look at the top left corner of the window noticing a collection of additional links grouped under the title "Tasks". Navigate to and click the first link in the group 'View installed updates.' Be patient and let the list of installed updates populate; this may take some time depending on how many updates you have installed across your entire system including software updates. After the list completes the population procedure scroll down until you locate the Expression Blend 2 SP1 installation entry; click it once to select it and navigate back up to the gray tool bar above the list and click the 'Uninstall' option link.

Proceed with the uninstallation normally and upon completion of the procedure wait a moment for your installed updates list to repopulate and make sure that the SP1 update is not present. Exit all the way out of the control panel and start up your copy of Expression Blend 2 and you will notice that Blend will start normally just as it did for Preston B on Windows XP.




Conclusion:

Service Pack 1 for Expression Blend 2 is a public preview release and not a mainstream release candidate yet from what I have ascertained. At this point in time the fact that the Service Pack causes a lockout with Blend 2 stipulates that the community can not effectively evaluate the package as it stands. Blend 2 users, like myself and Preston B, will have to wait for a more accessible, updated Blend 2 SP1 preview or just bide until the final release of the update package.

这篇关于Expression Blend 2 SP1安装失败的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持IT屋！